Skip to main content

Monroe Quality Contractors

How to Choose Bathroom Tile in Lake Norman, NC

Walk into any tile store and you will see walls of samples. Big tiles, small tiles, shiny tiles, stone tiles, tiles that look like wood. It is easy to feel lost. But bathroom tile selection in Lake Norman, NC does not have to be hard. Once you know what goes on the floor, what goes in the shower, and what lasts in a wet room, the choice gets much simpler.

Tile keeps water out, gives you a safe surface to stand on, and sets the look of the whole room.

Bathroom Tile Selection in Lake Norman, NC: Porcelain vs. Ceramic vs. Stone

Most bathroom tile falls into three groups.

Porcelain tile is the workhorse. It is a dense, hard tile made from fine clay fired at high heat. It soaks up almost no water, so it is the best choice for shower floors and walls. It comes in every look you can think of, including styles that copy marble, wood, and stone. Porcelain costs more than basic ceramic, but it lasts longer in a wet room.

Ceramic tile is porcelain’s lighter cousin. It is cheaper and easier to cut, which makes it a good pick for bathroom walls. But ceramic soaks up more water, so it is not the best choice for a shower floor that stays wet every day.

Natural stone — marble, travertine, slate, and granite — is real rock cut into tiles. It looks rich and never goes out of style. But stone is porous, which means it soaks up water and stains unless it is sealed. Sealing is a clear coat painted on the stone to block water, and it must be redone every year or two. Stone also costs more, both for the tile and the labor.

A quick rule: porcelain for floors and showers, ceramic for walls, stone only if you are ready to seal it. If you pick one tile for the whole bathroom, pick porcelain.

What Size Tile Should You Pick?

Big tiles make a small bathroom look bigger, because there are fewer grout lines to break up the floor. Grout is the paste that fills the gaps between tiles. Large tiles — 12 by 24 inches is common now — work well on floors and shower walls.

Small tiles have their own job. On a shower floor, small tiles grip better. The grout lines between them give your feet something to hold onto. Small mosaic tiles are the standard pick for shower floors. They also bend around the slight slope that sends water to the drain. One warning: a large flat tile cannot follow that slope, so water pools on it. Use small tile on the shower floor and save the big tile for the walls and the main floor.

Grout, Color, and Finish

Grout holds the tile in place and seals the gaps so water cannot get behind it. Sanded grout has fine sand mixed in and is the right pick for floor tiles with wide gaps. Unsanded grout is smooth and is used for wall tiles and narrow gaps, where sand would scratch the tile.

Color is a style choice with a real-life cost. White grout looks clean on day one and shows dirt fast. A light gray or warm beige grout hides dirt and still looks fresh years later. On a shower floor, go a shade darker than you think you want.

Finish is the shine level of the tile surface. Glossy tile reflects light and makes a room feel bright, but it gets slick when wet. Use it on walls, not on floors. Matte tile has a flat, soft look and grips better underfoot. It is the safer pick for floors and shower floors.

Bathroom floors get wet, so pick a floor tile that grips. Tile boxes carry a slip rating, but the labels are full of trade terms. Here is the short version: ask your contractor for tile rated for wet floors. In the store, wet your hand and rub the tile sample. If your hand slides with no grip, your bare feet will too.

What Does Bathroom Tile Cost in Lake Norman, NC?

Here are realistic ranges for the Lake Norman area, tile and labor together, installed:

  • Basic ceramic wall tile: $8 to $15 per square foot
  • Porcelain floor tile: $12 to $25 per square foot
  • Porcelain shower tile (walls and floor): $15 to $30 per square foot
  • Natural stone tile: $20 to $40 per square foot
  • Accent or mosaic tile (a stripe or niche): $25 to $50 per square foot

A typical full bathroom — about 60 square feet of floor and 80 square feet of shower wall — runs $2,000 to $5,000 for tile and labor. The final number depends on the tile you pick, the size of the room, and whether old tile has to come out first. Budget for the extras too: grout, the waterproof backing behind shower tile (called backer board), trim pieces for the edges, and sealer if you pick stone.

Three Mistakes to Avoid

First, picking tile before the layout is set. The tile should fit the room, not the other way around. A tile that looks great in the store can leave thin slivers at the edge of your wall. A good installer plans the layout first, then orders the tile.

Second, skipping the waterproofing. Tile itself is not waterproof. The grout and the tile keep most water out, but the real protection is the layer behind the tile — a waterproof membrane or backer board. If a contractor skips this step, water gets into the wall and you get mold and rot. Always ask how the shower will be waterproofed.

Third, ordering too little tile. Tile breaks during cutting, and dye lots — batches of tile made at the same time — can look slightly different from one batch to the next. Order 10 to 15 percent more than you need, and keep a few spare tiles after the job. If one cracks in five years, you will be glad you have a match.

How Long Does a Tile Job Take?

Tiling a bathroom floor takes one to two days. Tiling a full shower takes three to five days, because the waterproofing has to dry and the grout has to cure — harden fully — before the shower can be used. A full bathroom re-tile usually takes about a week of work. The slowest part is often the wait before work starts: picking the tile and ordering it. Order everything before the old tile comes out.

Get Help Picking the Right Tile

Tile is one of the few parts of a bathroom remodel you will touch every single day. It is worth getting right. If you are planning a bathroom remodel in Lake Norman, Cornelius, Huntersville, Davidson, or Mooresville, call Monroe Quality Contractors at (980) 655-2491 or visit monroeqc.com for a free estimate. We are a licensed general contractor, and we will walk through your bathroom with you and give you a clear price.

Book An Appointment